1. How To Use A Shang-Run Cutting Board
Basically, In Order To Avoid Sliding When Cutting, You Can Put A Clean Cloth Under The Shang-Run Cutting Board To Effectively Avoid Sliding.
Please Wash The Wooden Shang-Run Cutting Board After Each Use. Do Not Wait Until After Eating. Wood Has Fibrous Holes. When You Eat And Rest, The Soup And Water From The Ingredients Slowly Seep In. Over Time, It Is Easy To Form A Layer Of Biofilm On The Surface Of The Shang-Run Cutting Board, Which Then Deteriorates And Becomes Moldy.
Therefore, Please Clean It As Soon As Possible. If You Don’T Mind It After Washing, You Can Find A Clean Cloth To Dry It. This Can Greatly Avoid The Chance Of Mold. After Drying, Place (Hang) It In A Ventilated Place.
2. What Should I Do If The Shang-Run Cutting Board Becomes Moldy?
If Mold Has Just Occurred, You Can Go To A Hardware Store To Buy White Sandpaper, No. 180 Or No. 320. Wait For The Shang-Run Cutting Board To Dry First (Don’T Grind It If It’S Wet), First Use 180-Grit Sandpaper To Remove The Moldy Parts, And Then Use 320-Grit Sandpaper To Finely Grind It To Avoid Roughness. Please Oil And Maintain It Immediately After Grinding! But If The Mold Is Too Severe, It Is Recommended To Replace It Directly.
3. Can I Use Detergent On The Shang-Run Cutting Board?
Of Course You Can, But What Should You Do After Cutting The Greasy Ingredients? But Please Note That You Must Wash It Immediately And Rinse It Immediately!
4. Can Shang-Run Cutting Boards Be Placed In The Dish Dryer When Exposed To The Sun?
No! Any Quick Drying Method Is Not Suitable For Wooden Shang-Run Cutting Boards. When The Shang-Run Cutting Board Is Cleaned, Moisture Is Not Only On The Surface, But Also Enters The Inside Through The Pores. Therefore, When A Quick Drying Method Is Used, The Drying Speeds On The Outside And Inside Are Different. , The Wooden Shang-Run Cutting Board Will Crack! So Please Wash It And Place It In A Cool And Ventilated Place!
5.How To Maintain Shang-Run Cutting Boards
Usually The Maintenance Of Shang-Run Cutting Boards Is Once A Month. When The Wood Is A Tree, It Will Not Dry Due To The Transportation Of Moisture. However, After Being Cut Into Wood, The Wood Will Become Dry, So Please Oil The Wood Once A Month For Maintenance. The Maintenance Method Is To Wait For The Wooden Shang-Run Cutting Board To Be Cleaned, Place It In A Ventilated Place, Wait For The Surface Of The Shang-Run Cutting Board To Be At Least Dry (About An Hour), And Then Apply Oil On The Entire Shang-Run Cutting Board For Maintenance.
6. Principles For Selecting Chopping Board Maintenance Oil
Please Choose Oils That Are Of Raw Drinking Grade, Such As Olive Oil, Linseed Oil, Walnut Oil, Grape Seed Oil, Coconut Oil...
Is Soybean Oil And Vegetable Oil Okay? In Fact, It Is Not Impossible, But Usually Lower-Priced Oil Products Will Have The Problem Of Oil Consumption Smell, And If The Ingredients Are Contaminated With Oil Consumption Smell, It Will Affect The Ingredients! After Wiping The Entire Shang-Run Cutting Board, You Can Leave It Alone And Let The Oil Slowly Moisten The Fiber Of The Wood. Wipe It Off Or Rinse It Slightly Before Use. (To Put It Simply, The Reason Why Girls Apply Lotion After Taking A Shower Is The Same)
Post time: Dec-10-2023